Watts ISCA-102-D - Manual

ES-WD-ISCA-102-D USA 1007 ISCA-102-D
Tag:
SPECIFICATION: Watts Drainage Products ISCA-102-D Industry Standard back-to-back horizontal adjustable water closet
carrier with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated ductile
iron patented compression seal faceplate assembly, epoxy coated ductile iron foot supports and rod support assembly
adjustable for standard and wheelchair height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap
and neoprene bowl gasket, stainless steel support rods and hardware, and chrome plated cap nuts. Carrier complies with
requirements of ASME A112.6.1M up to a 1000 lb. (454 kg.) static load.
Industry Standard
Back-To-Back Horizontal
1000 lb. Bariatric Closet Carrier
ISCA-102-D
NOTE: All foot supports must be securely anchored to concrete
floor with min. 1/2"(13) anchors with pull-out force of 500 lbs.
(227 kg). Rear anchor support must be securely anchored with
min. 1/2"(13) anchors with pull-out force of 1000 lbs. (454 kg).
Options (Select One or More)
Suffix Description
-M20 Flush Valve Support
0" MIN
4" (102) MAX
9" (229)
15" (381)
26"
(660)
9"
(229)
4 1/4"
(108)
4 1/4"
(108)
1 9/32" (32)
5/16"
(8)
1 9/32" (32) 5/16"
(8)
10 5/8"
(270)
4 11/32"
(110)
4 11/32"
(110)
5 3/8" (137)
6" (152 )
5 1/2"
(140 )
4 1/2"
(114 ) 5"
(127 )
7-1/2" (191)
4-7/8" (124)
MIN
9-1/2"(241)
MAX
17-3/4" (451)
USA: 100 Watts Road, Spindale, NC, 28160-2298; TEL: 828-288-2179 TOLL-FREE: 1-800-338-2581 www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca