Watts PWR4024 - Manual

For Commercial Applications
ES-WQ-PWR4024
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
Series PWR4024
Series PWR4024
Commercial Reverse
Osmosis Systems
Flow Rates: Up to 30 gpm (113 lpm)
Watts Pure Water Series PWR4024 reverse osmosis (RO) systems
are commercial grade high-pressure RO units for the reduction
of total dissolved solids from water. They are designed to supply
reverse osmosis quality water with production rates ranging from
20 to 30 gallons per minute. These units are designed for floor
mount installations. Reverse osmosis is a process where high-
pressure feed water is fed into a semi-permeable membrane. In
the membrane, pure water is allowed to pass through the mem-
brane material and exit as purified permeate water. Dissolved
mineral salts are not allowed to pass through the membrane and
become a concentrated reject stream that is sent to a drain. These
RO systems use high-pressure/high-rejection membranes to
achieve a minimum average NaCl ionic rejection of 97 percent.
Watts Pure Water Series PWR4024 RO systems are a well
designed, rugged line of purifiers. This series comes with a pre-
selected assortment of features, including our digital controller for
monitoring and operation. Corrosion resistant fiberglass reinforced
plastic (FRP) membrane housings, inlet and outlet pre-filter pres-
sure gauges, low-pressure switch with delayed auto restart, inputs
for tank level and pretreatment interlock, conductivity meter, high-
conductivity alarm output, adjustable reject recycle, permeate and
reject water flow meters, reject recycle flow meter, permeate water
check valve, inlet diaphragm valve, membrane feed and reject
water pressure gauges, auto flush, and adjustable reject valve,
are all standard features. These systems are designed to feed an
atmospheric storage tank for collection of the reverse osmosis
water. Reverse osmosis water has a wide variety of applications
including municipal water treatment, steam boiler and steam steril-
izer make up, laboratory use, spot free rinsing, ice and beverage
water, water for cooking, food processing, metal plating and finish-
ing, as well as water for humidification. Reverse osmosis is also
the pretreatment of choice for ion exchange type de-ionization (DI)
systems. Using RO water as make up to a DI system reduces the
exhaustion rate of the DI resin by up to 95 percent saving time,
money, and chemicals associated with DI resin regeneration.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Features
• Powder coated carbon steel support frame
• Corrosion resistant 300psi FRP high-pressure membrane housings
• Pressure gauges for pre-filter inlet/outlet, membrane feed, and
reject water pressure
• Low feed water pressure safety switch
• Digital microprocessor based controller with delayed auto restart
after low pressure shut down
• Permeate water conductivity meter with high conductivity alarm
output
• Tank level and pretreatment interlock inputs
• High-pressure/high-rejection membranes with 97% minimum
average salt rejection
• Permeate, reject recycle, and reject water flow meters
• Adjustable reject and reject recycle valves
• Permeate check valve
• Automatic inlet diaphragm valve
• 90 gallon per minute high flow 316 stainless steel pre-filter
Standards
Pre-filter Housing- NSF/ANSI Certified Std. 42
Membrane Housings- NSF/ANSI Certified Std. 61
PURE WATER
Note: Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after the
system.