Watts LFFBVS-4 User Manual

Series lffbv-4, lffbvs-4, Lead free, Piece, full port, brass ball valves

Advertising
background image

2-Piece, Full Port,

Brass Ball Valves

Sizes:

1

4

" – 3" (8 – 80mm)

Series LFFBV-4, LFFBVS-4 2-Piece, Full Port, Brass Ball Valves are suit-

able for a full range of liquids and gases in residential and commercial

applications.
These valves feature an adjustable packing for longer service life, a

bottom loaded blow-out proof stem for safety, a fluorocarbon elasto-

mer stem O-ring to prevent stem leaking at installation, and are rated to

600psi WOG/150psi WSP

1

4

"– 2" (8 – 50mm) and 400psi WOG/125psi

WSP 2

1

2

"– 3" (65– 80mm). The LFFBV-4, LFFBVS-4 features Lead Free*

construction to comply with Lead Free* installation requirements.

Features

• CSA approved threaded valves only ¼" – 3"
• Certified to NSF/ANSI Standard 61/8
• Metal-to-metal adapter body seal to eliminate adapter leaks

after soldering

• Fluorocarbon elastomer stem O-ring prevents stem leaks
• Adjustable stem packing gland provides longer service life
• Bottom loaded blowout proof stem
• PTFE stem packing seal and seats
• Machined chrome-plated Lead Free brass ball
• Complies with MSS-SP-110

Models

LFFBV-4

1

4

" – 3" (8 – 80mm) threaded end connections

LFFBVS-4

1

2

" – 3" (15 – 80mm) solder end connections**

Specifications

Approved valves shall be 2-piece full port design constructed of a forged

Lead Free copper silicon cast alloy body and end adapter. Lead Free*

2-Piece, Full Port, Brass Ball Valves shall be constructed using Lead

Free* materials. Lead Free* valves shall comply with state codes and

standards, where applicable, requiring reduced lead content. Seats and

stem packing shall be PTFE. Stem to be bottom-loaded, blowout proof

design with a fluorocarbon elastomer O-ring to prevent stem leakage.
Valves required to have an adjustable packing gland and chrome-plated

brass ball. Threaded valves ½" – 3" shall be CSA approved to ½ psig

and 5 psig and certified to NSF/ANSI Standard 61/8 by NSF. Solder

valves also required to be certified by NSF to NSF/ANSI Standard 61/8.

Valve sizes ¼" – 2" pressure rated to 600 psi WOG and 150 psi WSP.

Valve sizes 2 ½" – 3" pressure rated to 400 psi WOG and 125 WSP.

Valves specified are Watts Series LFFBV-4 or LFFBVS-4.

For Residential and Commercial Applications

ES-LFFBV-4

Job Name –––––––––––––––––––––––––––––––––––––––––––

Contractor ––––––––––––––––––––––––––––––––––––––––––––

Job Location –––––––––––––––––––––––––––––––––––––––––

Approval –––––––––––––––––––––––––––––––––––––––––––––

Engineer –––––––––––––––––––––––––––––––––––––––––––––

Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––

Approval –––––––––––––––––––––––––––––––––––––––––––––

Representative ––––––––––––––––––––––––––––––––––––––––

**This valve is designed to be soft soldered into lines without dis-

assembly, using a low temperature solder to 420°F (216°C). Higher

temperature solders may damage the seat material.

Pressure — Temperature

Temperature Range: -40ºF to 400ºF (-40ºC to 204ºC)
Pressure Rating:

1

4

"– 2" (8 – 50mm)

600psi (41.4 bar) WOG non-shock

150psi (10.3 bar) WSP

2

1

2

"– 3" (65– 80mm)

400psi (27.6 bar) WOG non-shock

125psi (8.6 bar) WSP

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

Series LFFBV-4,

LFFBVS-4

LFFBVS-4**

Approvals

¼" – 3" LFFBV-4

½" – 3" LFFBVS-4

Certified to NSF/ANSI Standard 61/8

Domestic cold water at 73°F

Gas Approvals (Threaded Valves Only)

¼" – 3"

CSA

½ psig, 5 psig

@ -40°F to 125°F

LFFBV-4

Installation Information

Apply heat with the flame directed

AWAY from the center of the valve

body. Excessive heat can harm the seats. After soldering, the packing

nut may have to be tightened.

LEAD FREE

*

*The wetted surface of this product contacted by consumable

water contains less than 0.25% of lead by weight.

Advertising
This manual is related to the following products: