Watts BBH-40-8-CS - Manual

®
WATER QUALITY & CONDITIONING PRODUCTS
Filter housing features and benefits
• Rugged construction for heavy-duty performance
• Rated for pressures to 150 PSI (10 bar)
• Standard models for flow rates up to 1500 GPM
• Swing bolt lids with davit assist for ease-of-use
• 304, 316 & carbon steel construction
• ASME design, with U-stamp available
• Models with 1, 3, 5 and 8 cartridges are standard
Filter cartridge features and benefits
• Cartridges are 40" long x 6-3/8" OD for high flow
• Filter media is 100% synthetic (no cellulose)
• Pleated design for low pressure drop & long life
• Cartridges are cleanable and reusable to lower costs*
• Wide range of micron ratings are available
• End caps have o-ring seals for superior performance
*In water filtration, five micron and up.
Models
*Actual flow rates are based on micron rating, solids content and other factors. Please refer to pressure drop charts for more information.
Model Number Material Max. Flow (GPM)* Cartridges Pipe Size Drain Vent
BBH-40-1-CS Carbon steel 200 1 3" FNPT 1" FNPT 1/4"
BBH-40-3-CS Carbon steel 600 3 4" Flange 1" FNPT 1/2"
BBH-40-5-CS Carbon steel 1,000 5 8" Flange 1" FNPT 1/2"
BBH-40-8-CS Carbon steel 1,500 8 12" Flange 1" FNPT 1/2"
BBH-40-1-30 304 stainless 200 1 3" FNPT 1" FNPT 1/4"
BBH-40-3-304 304 stainless 600 3 4" Flange 1" FNPT 1/2"
BBH-40-5-304 304 stainless 1,000 5 8" Flang 1" FNPT 1/2"
BBH-40-8-304 304 stainless 1,500 8 12" Flange 1" FNPT 1/2"
BBH-40-1-316 316 stainless 200 1 3" FNPT 1" FNPT 1/4"
BBH-40-3-316 316 stainless 600 3 4" Flange 1" FNPT 1/2"
BBH-40-5-316 316 stainless 1,000 5 8" Flange 1" FNPT 1/2"
BBH-40-8-316 316 stainless 1,500 8 12" Flange 1" FNPT 1/2"
Industrial filter housings with proprietary pleated
cartridges for high flow rates and superior filtration.
Filter housings are available in carbon and stainless
steel for commercial, industrial and small community
water filtration applications.
Specifications
Temperature ratings 250°F (housings) 175° F (cartridges)
Pressure drop, vessel < 2 psi (empty)
Max. flow, 1 Absolute cartridges 50 GPM per 40" high-flow cartridge*
Max. flow, 1 micron nominal 100 GPM per 40" high-flow cartridge*
Max. flow, 5 micron nominal 125 GPM per 40" high-flow cartridge*
Max. flow, 20 micron nominal 150 GPM per 40" high-flow cartridge*
Max. flow, 50 & 100 micron nominal 200 GPM per 40" high-flow cartridge*
Lid gaskets Buna-N (standard); others available