Watts 3547B - Manual

Series 35
Quick-Connect
Accessories
Watts Quick-Connect Collet Clips, Cone Seals and O-Ring
assemblies are designed and manufactured for many years of
trouble free service. Produced of off white Polysulfone, a high
performance thermal plastic material, the Watts Quick-Connect
design allows for quick and easy connections without the use
of installation tools.
Specifications
Connection shall be made using Watts Series 35
Quick-Connect fitting with Integral Collet and O-Ring guide.
Fitting shall be able to fully rotate under pressure and allow for
easy disconnect and reuse without the use of disconnection
tools. Fitting must not disassemble to disconnect.
Approvals
NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC
Ratings
100psi @ 180°F (6.8 bar @ 82°C)
250psi @ 75°F (17.3 bar @ 24°C)
Example
3547-08
35 = Series 35 47 = Type 47 Collet Clip
08 = 3 /
8
" CTS
Caution: The polysulfone material used in the Quick-Connect fittings can be
compromised by exposure to volatile organic compounds (VOC’s) and caus-
tic chemicals. Therefore, DO NOT expose this product to any such chemical
or foreign substance, which would include exposure to the following prod-
ucts: Pipe Dopes (thread sealants), bug sprays, lubricants, cleaners,
paints, bleaches, acids, solder fluxes, plastic piping primers and cements,
oxidizing agents, alkaline solutions, thinners, fuels, oil based caulks,
hydrocarbons, spray foam of foaming agents (insulation).
For Residential and Commercial Applications
ES-QC-35Accessories
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
3547
35159 163
162
161