Watts LFWPBV - Manual

Series LFWPBV,
LFWPBVD
2-Piece, Full Port, Lead Free * Brass
Ball Valves with PEX Ends, with or
without waste drain
Sizes: 1 ⁄
2
" - 1"
Series LFWPBV and LFWPBVD 2-Piece, Full Port, Lead Free*
Brass Ball Valves with PEX Ends are designed for use in PEX
piping systems. They feature brass PEX end tailpieces designed
for easy crimping into a PEX piping system. The Series LFWPBV
and LFWPBVD features Lead Free* construction to comply with
Lead Free* installation requirements.
Features
• 2-piece, full port design
• Forged Lead Free* brass body
• PEX end designed to ASTM F-1807
• Crimp connection rated per ASTM F877 Systems
160psi@73°F (23°C), 100psi@180°F (82°C)
• LFWPBVD includes waste drain
• Designed specifically for use in PEX piping systems
Specification
Approved valve to be 2-piece, full port, forged brass body,
chrome plated brass ball, virgin PTFE seats and stem packing,
and Viton ® stem O-ring. PEX end must comply with ASTM F-1807
standard. Crimp joint rated per ASTM F877 systems 160psi@73°F
(23°C), 100psi@180°F (82°C). The valve shall be constructed
using Lead Free* brass. Lead Free* brass ball valves shall com-
ply with state codes and standards, where applicable, requiring
reduced lead content. Valve shall be Watts Series LFWPBV.
Viton
® is a registered trademark of DuPont Dow Elastomers.
Pressure-Temperature
Crimp Connection Rating: per ASTM F877 systems
160psi@73°F (23°C) 100psi@180°F (82°C) (refer to PEX piping
manufacturers guidelines)
For PEX Piping Systems
ES-WP-LFWPBV
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
LFWPBV
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
LEAD FREE
*
* The wetted surface of this product contacted by consumable
water contains less than 0.25% of lead by weight.