Watts 3576B - Manual

Series 35
Quick-Connect
Pump Fittings
Watts Quick-Connect Pump Fittings are designed and manu-
factured for many years of trouble free service. Produced of off
white Polysulfone, a high performance thermal plastic material,
the Watts Quick-Connect design allows for quick and easy
connections without the use of installation tools.
Specifications
Connection shall be made using Watts Quick-Connect Series
35 fitting with Integral Collet and O-Ring guide. Fitting shall be
able to fully rotate under pressure and allow for easy discon-
nect and reuse without the use of disconnection tools. Fitting
must not disassemble to disconnect.
Approvals
NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, ASSE 1061
For Residential and Commercial Applications
ES-QC-35PumpFittings
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
3575 3576
A
B
Dimensions – Weights
Weight and Dimensions are approximate (tolerance +/- 1/8)
Type 75 Union Pump Fittings
MODEL SizE & CONNECTiON iTEM LENGTH iTEM HEiGHT iTEM WEiGHT
A B
in. mm in. mm lbs. kg.
Package Type: Bulk
3575-10 1 ⁄
2 " CTS 2 5 ⁄
16
59 1 1 ⁄
8
29 0.6 .27
Package Type: Poly Bag
3575B-10 1 ⁄
2 " CTS 2 5 ⁄
16
59 1 1 ⁄
8
29 0.6 .27
Type 76 Elbow Pump Fittings
MODEL SizE & CONNECTiON iTEM LENGTH iTEM HEiGHT iTEM WEiGHT
A B
in. mm in. mm lbs. kg.
Package Type: Bulk
3576-10 1 ⁄
2 " CTS 2 1 ⁄
8
54 2 1 ⁄
8
54 0.8 .36
Package Type: Poly Bag
3576B-10 1 ⁄
2 " CTS 2 1 ⁄
8
54 2 1 ⁄
8
54 0.8 .36
A
B
Caution: The polysulfone material used in the Quick-Connect fittings can
be compromised by exposure to volatile organic compounds (VOC’s) and
caustic chemicals. Therefore, DO NOT expose this product to any such
chemical or foreign substance, which would include exposure to the fol-
lowing products: Pipe Dopes (thread sealants), bug sprays, lubricants,
cleaners, paints, bleaches, acids, solder fluxes, plastic piping primers and
cements, oxidizing agents, alkaline solutions, thinners, fuels, oil based
caulks, hydrocarbons, spray foam of foaming agents (insulation).
Ratings
100psi @ 180°F (6.8 bar @ 82°C)
250psi @ 75°F (17.3 bar @ 24°C)
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference
only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or
modify product design, construction, specifications, or materials without prior notice and without incurring any
obligation to make such changes and modifications on Watts products previously or subsequently sold.
A Watts Water Technologies Company
LEAD FREE
*
* The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of
lead by weight.
ES-QC-35PumpFittings 0933 © 2009 Watts