Watts TRFWP1 IPS Fusers - Manual

For Residential and Commercial Polyethylene Pipe Applications
ES-TRFWP1-FUSER
Job Name –––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––– Approval ––––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative –––––––––––––––––––––––––––––––––––––––––
Series TRFWP1
TRITON ™ IPS Fusers for PE Pipe
Sizes: 1 ⁄
2
" – 2" (20 – 50mm)
TRITON Series TRFWP1 Fusers are designed to amplify and
direct a radio frequency (RF) signal through a TRITON IPS sized
polyethylene fitting. The hand-held Fusers incorporate a me-
chanical fusing jaw that wraps around the TRITON Fitting at the
fusion zone. Once the Fuser is connected to the TRCU Control
Unit via its 20' coaxial cable, the Fuser button is used to identify
the Fuser size and type and initiate the fusion cycle. The Fuser
diode, located by the Fuser button, will glow a steady amber
color when the Fuser is connected and initiated. The diode will
blink on and off during the fusion cycle. Fusers can only be
placed around the TRITON Fitting in the fusion zone, but can
be inverted or rotated on the fitting.
TRFWP1
Dimensions — Weights
ES-TRFWP1-FUSER 1308 © 2013 Watts
USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com
Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
A Watts Water Technologies Company
Specifications
The system shall be plumbed using Watts TRITON Pipe Fusion
Fittings. Each TRITON Fitting incorporates the TRITON Fuse-Tel™
indicator that extrudes on completion of the joining process, pro-
viding a visual and tactile indication that the fusion is complete.
The TRITON Pipe Fusion system operates on 110/120 VAC
power and utilizes a 13.56MHz ISM band frequency in conjunc-
tion with a dual susceptor imbedded in the fitting to complete
the fuse.
Follow all building codes, standards, and regulations when using
the TRITON Pipe Fusion system.
MODEL DESCRIPTION DIMENSIONS WEIghT
A B C
in. mm in. mm in. mm Lb g
TRFWP1-08-CTS FUSER 1 ⁄
2
CTS 11 5 /
16
287.7 2 1 ⁄
4
57.5 2 7 ⁄
8
73.0 0.51 0.232
TRFWP1-12-CTS FUSER 3 ⁄
4
CTS 11 5 /
16
287.7 2 1 ⁄
4
57.5 3 1 ⁄
16
77.9 0.53 0.241
TRFWP1-16-CTS FUSER 1CTS 11 13 /
16
300.4 2 1 ⁄
4
57.5 3 1 ⁄
2
88.9 0.55 0.250
TRFWP1-12-IPS FUSER 3 ⁄
4
IPS 12 1 ⁄
8
307.8 2 1 ⁄
4
57.5 3 9 ⁄
16
90.7 0.55 0.250
TRFWP1-16-IPS FUSER 1IPS 12 1 /
4
311.4 2 1 ⁄
4
57.5 4 1 ⁄
8
105.2 0.56 0.254
TRFWP1-20-IPS FUSER 1 1 ⁄
4
IPS 13 1 ⁄
4
336.6 2 1 ⁄
4
57.5 4 1 ⁄
2
114.3 0.69 0.313
TRFWP1-24-IPS FUSER 1 1 ⁄
2
IPS 13 8 ⁄
16
342.9 2 1 ⁄
4
57.5 4 15 /
16
125.0 0.75 0.341
TRFWP1-32-IPS FUSER 2 IPS 14 3 ⁄
16
360.4 2 1 ⁄
4
57.5 6 152.4 0.82 0.372
A
B
C
TM