Watts PWPL90 - Manual

For Residential and Light Commercial Applications
ES-WQ-PWPL
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
Pleated Filter Cartridges
Pleated Filter Cartridges
Greater surface area for longer life and
reduced filtration costs.
Watts Pleated filter cartridges outperform wound, spun, melt
blown, resin bonded, and other ”depth” type filter elements
because of our high surface area.
Lower pressure drop is another significant advantage. Using
pleated cartridges allows for increased flow rates and the use
of smaller filter housings to reduce capital equipment costs.
Further savings are provided because our 100% synthetic
filter media is cleanable, 5 micron and up, to lower cartridge
replacement costs. Pleated filter cartridges outperform other
pleated elements because our high-performance filter media is
systematically produced using 100% synthetic fibers, with no
binders or additives to leave a residue, foam or contaminate.
Our filter media is dramatically thicker than other products.
For this reason, Pleated cartridges provide “depth” filtration for
greater sediment removal, along with more surface area.
Features
• Filter media is pleated for greater surface area
• Synthetic filter media is cellulose-free
• “Thicker” filter media has a greater capacity to capture and
retain particles, compared to thin, more rigid media types,
which have less void space for particle retention
• One micron absolute and 0.35 media use a
multi-ply laminate for superior performance
• Long lengths have netting to hold pleats in place
• All cartridge types and lengths are wrapped
• Full product line (Large selection of types, lengths &
micron ratings)
• Low pressure drop, long life, and reduced filtration costs,
compared to wound and spun cartridges
• No additives or binders, which may cause foaming
• Increased dirt holding capacity, longer life, fewer
cartridge replacements needed, and reduced filtration costs,
compared to other pleated cartridge suppliers
• Increased particle removal efficiency
• Superior performance and appearance
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
PURE WATER
A multi-ply laminate is used with our sub and one micron
absolute grades for longer life and greater solids removal.
Series PWPL
Note: Do not use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before or after
the system.