Watts Divertaflo M9500 Series - Manual (Page 7)

7
Water Pressure Regulators
Series P50 Miniature Pressure Regulator
• 1 ⁄
4
" NPT female connections
• High capacity
• Suitable for use on deionized equipment
• Bottom plug for clean-out service
Series P60 Miniature Pressure Regulator
• Same features as our P50 series but offered with a balanced
piston design for more accurate pressure performance.
For specifications and options,
please call or write for publication S-SS-263AP.
Series 560 Pressure Regulator
• Brass bodied, heavy duty miniature regulator
• IAPMO listed
• Delivery capacity up to 250 gph
• Model 560 has female threaded
1 ⁄ 8 " and 1 ⁄ 4 " inlet and outlet
connections. Female 1 ⁄ 8 " (3mm) side tapping (plugged) for gauge
• H560 has 3 ⁄ 4 " (20mm) female inlet and male outlet hose connections
For specifications and options, please call or write
for publications ES-560-26A and IS-IR 56/H560G.
Series 276H300 Water Pressure Test Gauge
• Hose connection gauge for testing water supply pressure
in a building
• 3 ⁄ 4 " H.T. Hot Connection which easily attached to an outside
hose bibb or to the drain connection on a water heater
• A red indicator hand that “HOLDS” at the highest reading
registered, to record shock pressure or when left on overnight
will register the highest surge pressure which occurred during
that period
• A large 2 1 ⁄ 2 " face for easy reading
For specifications and options,
please call or write for publication ES-276H
Series 26A and 263A
• Sizes 1 ⁄
8
", 1 ⁄
4
", 3 ⁄
8
" 1 ⁄
2
" (3-15mm) NPT threaded female inlet and
outlet connections
• Brass general purpose regulator
• Also available in stainless steel suitable for deionized
water (SS263AP)
• High flow up to 7 gpm
For specifications and options, please call or write
for publications ES-560-26A and S-SS263AP.
C-WTV 4/10/02 11:42 AM Page 7