Watts FS-CWM-S - Manual

For Residential and Commercial Applications
ES-FS-CWM-S
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
Series FS-CWM-S
FloodSafe
®
Braided Stainless Steel Washing
Machine Connectors
Series FS-CWM-S FloodSafe ® Braided Stainless Steel Washing
Machine Connectors are designed for use in residential & com-
mercial applications, specifically for hookups to the washing
machine water supply. They include a patented FloodSafe
®
shutoff device on the inlet side to protect against catastrophic
water damage. There are no mechanical moving parts during
normal operation and no power source is required. FloodSafe
®
connectors consist of PVC tubing jacketed with braided stain-
less steel and require no tube cutting, bending, or soldering dur-
ing installation. Various end connections are available.
Features
• Available in 48", 60" and 72" (1219, 1524 and 1829mm)
lengths
• IAPMO Listed
• Only economical and secure safeguard against catastrophic
water damage available on the market
• U.S. Patent No. 7,111,638
• No mechanical moving parts during normal operation, ensur-
ing years of maintenance free operation
• Does not require electricity, batteries or any other source of
power
• Installs between the stop valve and the fixture/appliance with
the FloodSafe™ device located at the stop valve
• FloodSafe™ connectors can be easily reset if water flow has
been stopped
MODEL SIZE (DN) LENGTH MATERIAL WEIGHT
in. mm in. mm lbs kgs
FS-CWM-S-HH 3 ⁄
4
x 3 ⁄
4
20 x 20 48 1219 Stainless Steel 0.76 0.34
FS-CWM-S-HH 3 ⁄
4
x 3 ⁄
4
20 x 20 60 1524 Stainless Steel 0.90 0.41
FS-CWM-S-HH 3 ⁄
4
x 3 ⁄
4
20 x 20 72 1829 Stainless Steel 1.04 0.47
Models
FS-CWM-S-HH – Supplied with standard brass female hose
bibb fittings at each end of the flexible
connector.
Pressure – Temperature
Maximum Temperature: 180°F (82°C)
Maximum Pressure: 125psi (8.8 bar)
Note: A minimum flow rate of 2.5 gallons per minute at the
supply connection is required for proper shut off operation.
(Typically 30wpsi supply pressure meets this requirement.)
Performance is accurate to the 80psi Maximum system pres-
sure as required by national plumbing codes.
Hose Bibb end Hose Bibb end
3 ⁄
4
" ----------------------- 48", 60", 72" ---------------------- 3 ⁄
4
"
H H
ES-FS-CWM-S 0843 ©Watts, 2008
Specifications
A braided stainless steel washing machine connector shall be
installed as indicated on the plans. The connector shall have a
patented FloodSafe
® shutoff device on the inlet side. The con-
nector shall be pressure rated to 125psi (8.75 bar) and be
IAPMO listed. Connector shall be a Watts Regulator Company
Series FS-CWM-S.
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
W a t e r S a f e t y & F l o w C o n t r o l P r o d u c t s
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.