Watts ISCA-103-L/R - Manual

ES-WD-ISCA-103-L/R USA 1338 ISCA-103-L/R
Tag:
SPECIFICATION: Watts Drainage Products ISCA-103-L/R Industry Standard single horizontal adjustable water closet carrier
with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated cast iron
patented compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair
height, ductile iron rear anchor support, adjustable ABS nipple with integral test cap and neoprene bowl gasket, stainless steel
support rods and hardware, and chrome plated cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a
750 lb. (340 kg.) static load.
Industry Standard
Single Horizontal 750 lb.
Closet Carrier
NOTE: All foot supports must be securely anchored to concrete
floor with min. 1/2"(13) anchors with pull-out force of 500 lbs.
(227 kg). Rear anchor support must be securely anchored with
min. 1/2"(13) anchors with pull-out force of 1000 lbs. (454 kg).
Options (Select One or More)
Suffix Description
-M20 Flush Valve Support
USA: 100 Watts Road, Spindale, NC, 28160-2298; TEL: 828-288-2179 TOLL-FREE: 1-800-338-2581 www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
ISCA-103-L/R
4 1/4"
(108)
3" (76) MIN.
2 3/16" (56)
5 3/8"
(137)
5 1/2"
(140)
12 1/2" (318)
5 1/2"
(140)
4" (102) MAX.
5/16"
(8)
9" (229)
15" (381)
7-1/2" (191)
4-7/8" (124) MIN 9-1/2"(241) MAX
17-3/4" (451)
0" MIN
4" (102) MAX 5 3/8"
(137)
6" (152 )
4 1/2"
(114 ) 5"
(127 )
5 1/2"
(140)
1 9/16" (40)
11" (279)
9 7/16" (240) 6 3/8" (162)
4" (102)
2" (51) NH VENT
REAR SUPPORT LUG & ANCHOR BAR ASSEMBLY
BASE SUPPORT
THRUST BEARING NUTS & WASHERS
FINISHED WALL
ABS COUPLING WITH INTEGRAL TEST CAP
-HS Hub & Spigot Connections
-M11 Tiling Frame
-US Buy American Compliant