Watts Polyethylene Tubing - Reels - Manual

For Commercial & Residential Applications
ES-PolyTubing
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
Polyethylene Tubing
Our Low Density Polyethylene is manufactured from virgin non-toxic FDA
materials.
Attributes
• Odorless
• Tasteless
• Lightweight
• Resistant to stress cracks
• Very easy to handle
• Color allows fluid levels and flow to be visually monitored
Applications
• Laboratories lines • Food and Beverage Dispensing
• Hospitals • Potable water applications
• OEM Machines • Feed Lines
• Chemical Processing • Drain Lines to Pneumatic Lines
• Wire Jacketing • Signal Lines used in instrumentation
Resistant to
Solvents, acids, alkalis and fuels
Operating Temperature Range . . -42°F (-41°C) to 125°F (52°C)
Material . . . . . . . . . . . . . Low Density Polyethylene
Color . . . . . . . . . . . . . . . White
Hardness . . . . . . . . . . . . . Durometer 80+/-3 Shore D
Toxicity . . . . . . . . . . . . . . Non-Toxic FDA Compliant
Material
Packaging
Coils, Dispenser Boxes, Dispenser Spools
ES-PolyTubing 1012 © 2010 Watts
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
A Watts Water Technologies Company
LEAD FREE
*
* The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of
lead by weight.
Pressure Range
O.D. I.D. WALL WORKING PRESSURE
INch INch (PSI @ 70°F)
1/8 1/16 1/32 140
3/16 1/8 1/32 140
1/4 .170 .040 140
1/4 1/8 1/16 130
5/16 3/16 1/16 130
3/8 1/4 1/16 120
1/2 3/8 1/16 100
5/8 1/2 1/16 85
5/8 3/8 1/8 100
3/4 5/8 1/16 60
3/4 1/2 1/8 70
7/8 3/4 1/16 60
7/8 5/8 1/8 70
1 7/8 1/16 45
1 3/4 1/8 70
1-1/4 1 1/8 60