Watts PWMB40 - Manual

For Residential and Light Commercial Applications
ES-WQ-PWMB
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
Melt Blown Filter Cartridges
Melt Blown Filter
Cartridges
Flow Rates: Up to 20 gpm (75 lpm) on
4 1 ⁄
2
" x 20" cartridges
The Watts series of Melt Blown Cartridges reduce sediment,
dirt, rust and particles. Food grade for use with beverages,
food, and potable water. A wide range of lengths and micron
ratings are available.
Features
• Low cost
• Excellent chemical resistance
• Food grade for food and beverages
• No media migration
• High dirt holding capacity
• Wide range of lengths
• Five different micron ratings
Applications
• Potable water
• Beverages
• Pre-filtration for RO
• Fine chemicals
• Metal finishing
• Plating solutions
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
PURE WATER
0 2 4 8 10
1.0
.8
.6
.4
.2
0
1 Mic.
Flow (GPM)
Pressure Drop (psi)
5 Mic.
20 Mic.
50 Mic.
Pressure Drop -
For Cartridges 2 1 ⁄
2
" Dia. x 10" length
ANSI/NSF
STANDARD 42
COMPONENT
CERTIFIED
Specifications
Material Melt blown polypropylene
Maximum temperature 140˚F / 60˚C
Maximum pressure 40 PSID
Recommended change out 30 PSID
Maximum flow rate See Pressure Drop Chart
Cartridge packaging Shrink wrapped for purity
Note: Do not use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before or after
the system.