Watts 97FD-CIB - Manual

For Commercial and Industrial Applications
ES-97FD-CIB
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
Series 97FD-CIB
Cast Iron Duplex Strainers
Flanged Connections, Bolted Covers,
and Butterfly Isolation Valve
Sizes: 5" – 14" (125 – 350mm)
For liquid service only.
Models
97FD-CIB: Cast iron body with bolted cover.
Standard Screens
1 ⁄
8
" 304 stainless steel perforation
Pressure — Temperature
97FD-CIB:
Maximum Pressure 200psi (14 bar) WOG (non-shock)
Maximum Temperature: 100°F (38°C)
Material
Body: Class B Cast Iron ASTM A-126
Flange: Class 125 ANSI B16.1
Item descrIptIon materIal quantIty
1 Inlet/Outlet Manifold Cast Iron ASTM A-126 2
2 Studs and Nuts B7 & 2H Cast Steel as required
3 Gaskets Red Rubber as required
4 Butterfly Valves Cast Iron w/EPDM Liner 4
5 Nameplate Aluminum 1
6 Basket Strainer Cast Iron 2
*7 Slave Linkage Assembly Cast Steel 2
*8 Gear Actuator Steel 2
* Optional Features
sIZe (dn) dImensIons WeIGHt
A B C D E F G
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs.
5 125 48 1219 12 1 ⁄
2
318 8 203 8 203 15 381 1 25 17 432 500 227
6 150 52 1321 13 1 ⁄
8
333 8 5 ⁄
8
219 7 3 ⁄
4
197 16 406 1 1 ⁄
4
32 19 483 800 363
8 200 61 1549 14 1 ⁄
2
368 11 3 ⁄
4
298 7 3 ⁄
4
197 18 457 3 ⁄
4
20 25 635 1350 612
10 250 70 3 ⁄
4
1797 16 406 13 3 ⁄
4
349 7 3 ⁄
4
197 22 559 3 ⁄
4
20 29 737 2050 930
12 300 83 2108 19 1 ⁄
2
495 16 3 ⁄
8
416 10 1 ⁄
2
267 24 610 1 25 37 940 4700 2132
14 350 96 1 ⁄
2
2451 26 660 22 1 ⁄
4
565 10 1 ⁄
2
267 30 762 1 1 ⁄
2
40 41 1041 6300 2857
Dimensions — Weights
Materials — Specifications
4
8
B
D
E
G
C
A
7
6
5
1
3
2
F
LEAD FREE
*
*The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of
lead by weight.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.