Watts ISCA-131-D - Manual

ES-WD-ISCA-131-D USA 1343 ISCA-131-D
Tag:
SPECIFICATION: Watts Drainage Products ISCA-131-D Industry Standard back-to-back vertical adjustable water closet
carrier with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, 4"(102) no hub side
inlet(s), epoxy coated cast iron patent pending compression seal faceplate assembly, epoxy coated cast iron foot supports
adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket,
plated hardware and chrome cap nuts. Carrier complies with requirements of ASME A112.6.1M up to a 300 lb. (136 kg.)
static load.
Industry Standard
Back-To-Back Vertical Adj.
Closet Carrier w/Side Inlet
ISCA-131-D
Notes:
Siphon jet (4 bolt) arrangement shown. Invert faceplate
assembly for blow-out (3 bolt) bowls.
Anchor legs to concrete floor with minimum 1/2" (13) anchor
bolts (by others).
Options (Select One or More)
Suffix Description
-M1 ABS Extended Nipple (Up to 24")
-M11 Tiling Frame
-M20 Flush Valve Support
CA-100-EXT Aux. Support System w/Extended Nipple
X = 5-3/4" (146) Maximum with Standard Nipple
5" (127) MIN.
9" (229) MAX.
9" (229)
15" (381)
7-1/2" (191)
4-1/2" (114)
MIN.
9-1/2" (241)
MAX.
17-3/4" (451) 1-3/4" (44) MIN.
5-3/4" (146) MAX.
12-1/2"
(314)
6-1/2"
(165)
"X"
5/16"
(8)
"X"
5/16"
(8)
2-3/32 (53)
15-1/2" (394) MIN. 25-1/2" (648) MAX.
CAP FOR
UNUSED INLET
2-3/32 (53)
10-5/8" (270)
-HS Hub & Spigot Connections
Extra-Heavy 500lb. Carrier (ASME A112.6.1M)
with 3/4" - 10" Stainless Steel Studs
-XH
-US Buy American Compliant