Watts WP9S - Manual

For Residential & Commercial Applications
ES-WP-CinchClamps
LEAD FREE
*
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
*The wetted surface of this product contacted by consumable
water contains less than 0.25% of lead by weight.
Stainless Steel
CinchClamps
TM
and Close Ear
CinchClamps
TM
Sizes: 3 /
8
" to 1"
Stainless Steel CinchClamps TM are used to make a leak tight
and secure cinched connection of brass (ASTM F1807) or plastic
(ASTM F-2159) PEX fittings to PEX (ASTM F-877) CTS sizes
SDR9 pipe.
Specifications
System shall be plumbed using Watts WaterPEX ® cross-linked
polyethylene pipe and all joints shall be made using Watts Lead
Free* Brass Crimp Ring TM and/or Poly-alloy CrimpRing TM fittings using
the Watts stainless steel CinchClamp TM as outlined in the Watts
Installation Guidelines.
Installation
Stainless Steel CinchClamps TM must be installed in accordance with
all Watts Installation procedures, including information provided in
installation manual and guidelines.
Installation of Stainless Steel CinchClamps
TM requires the use of a
properly calibrated manual, electric or battery operated cinching tool
with the proper sized jaw. The tool must be field calibrated to the
proper specifications on a regular basis. Refer to proper calibration
instructions on the tools instruction sheet.
Watts WaterPEX CinchClamps
TM should not be used with wrought
copper PEX fittings.
Approvals
ASTM NSF
• Manufactured in accordance with American Society for Testing and
Materials (ASTM International F877, F1807, F2159, and F2098).
• Listed by the NSF International to NSF Standards 14 and 61 for use
in potable water systems.
WARNING !
If connections must be made in temperatures below 30°F (-1°C),
caution must be taken to allow the WaterPEX pipe to form a
proper seal against the fitting barb. Apply the connection slowly
to ensure the PEX material conforms to the barb.
Close Ear CinchClamps
Stainless Steel CinchClamps
MODEL SIZE TYPE PACKING WEIGhT
in. mm lbs. kgs.
WP9S-06PB 3 ⁄
8
10 SS CinchClamp .1 .05
WP9S-08PB 1 ⁄
2
15 SS CinchClamp .1 .05
WP9S-12PB 3 ⁄
4
20 SS CinchClamp .2 .09
WP9S-16PB 1 25 SS CinchClamp .2 .09
WPSCE-08PB 1 ⁄
2
15 CE CinchClamp .1 .05
WP9CE-12PB 3 ⁄
4
20 CE CinchClamp .1 .09
Dimensions — Weights
ES-WP-CinchClamps 1345 © 2013 Watts
USA: Tel: (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com
Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.watts.ca
A Watts Water Technologies Company