Watts BBH-150 - Manual

Components
BBH150 Big Bubba ® Non-Metallic
Filter Housings for High Flow
With optional activated carbon cartridge to
remove Chlorine, bad tastes, foul odors and
sediment.
w a t t s . c o m
Big Bubba ® Non-Metallic Filter Housings
Proprietary Cartridges
The replacement cartridge for the Watts whole house
filter is totally proprietary, so you may enjoy the replace-
ment cartridge business over the life of the equipment
Conserves Water!
Watts whole house filters with our proprietary pleated ac-
tivated carbon cartridge conserves water because back-
washing is not required, making them 100% efficient.
E-Z Change-Out
Cartridge replacement is easy as 1-2-3:
1. Remove swing bolts.
2. Remove lid.
3. Rotate cartridge 1/4 turn and pull-up.
Double O-Rings
For superior sealing.
Filter outlet.
Filter inlet.
Rugged Construction
Filter housings are made of rugged, glass-reinforced
polypropylene so they will not chip, rust or dent. And
because all wetted surfaces are non-metallic, they are
ideal when chemical compatibility is an issue and for sea
water applications.
Low Cost
Filters are an economical replacement for stainless
steel filtration equipment because of their non-metallic
construction and today’s high cost of stainless steel!
Model: BBH-150
• Whole house filtration
• Commercial filtration
• Industrial filtration
• Pre-filtration for reverse
osmosis equipment
• Community water
systems
• Sea water applications
due to their non-
corrosive construction
• Replacement for bag
filters more filter area
• Replacement for
multiple cartridge filters
for greater convenience
• Water for livestock
and poultry
Applications
Big Bubba ® Cartridge Filters are ideal for a wide range of
applications, including:
Parallel installation
Parallel installations are recom-
mended to achieve high flow rates,
by installing filters on a common
manifold, feeding all filters installed
in a row.
Series installation
Series installations are recommended
for applications such as surface water
filtration, where cartridges having dif-
ferent micron ratings are used.