Watts B6000-SS - Manual

Series B6000-SS
2-Piece, Standard Port, Bronze
Ball Valves
Sizes: 1 ⁄
4
" – 4" (8 – 100mm)
Series B6000-SS 2-Piece, Standard Port, Bronze Ball Valves feature a
316 stainless steel blowout proof pressure retaining stem with Durafill
®
or Uniseal ® seats and a 316 stainless steel ball to provide lasting service
for a wide range of liquids and gases.
Features
• 316 Stainless steel ball and stem
• Minimal pressure drop due to large ports
• Blow-out proof, pressure retaining stem
• High life cycle reinforced PTFE stem packing and thrust washer
• Vinyl insulator on heavy duty, zinc-plated, carbon steel handles
• Fast quarter-turn open or close operation
• Low operating torque
• Adjustable stem packing gland requiring minimal maintenance
• Each valve factory tested
Specifications
A 2-piece, standard port, bronze steam ball valve to be installed as indi-
cated on the plans. The valve must have a 316 stainless steel ball &
stem, a blowout proof pressure retaining stem and a reinforced PTFE
stem packing seal. Pressure rating no less than 600psi (41 bars) WOG
non-shock; 150psi (10.3 bars) WSP for
1 ⁄ 4 " – 3" and 400psi (28 bars)
WOG non-shock; 125psi (8.6 bars) WSP for 4". Valve shall be a Watts
Regulator Company Series B6000-SS.
Durafill ® is a registered trademark of Cargill, Limited.
Uniseal ® is a registered trademark of Uniseal, Incorporated.
For Commercial and Industrial Applications
ES-B6000-SS
Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location ––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––
B6000-SS
B6000-SS-LH
with locking lever handle
Options
Suffix
04 – Mineral filled PTFE seats
LH – Locking lever handle
OV – Oval handle
OVLH – Oval locking handle
RH – Round handle
SH – Stainless steel handle and nut
XH – Extended handle
TH – Tee handle
1 ⁄ 4 " – 2" (8 – 50mm)
CL – Chain lever kit 3 ⁄ 4 " – 1" (20 – 25mm)
Pressure – Temperature
Temperature Range: 0°F - 450°F ( -18°C to 232°C)
@ 50psi (3.4 bars)
1 ⁄
4
" – 3" (8 – 50mm)
600psi (41 bars) WOG non-shock
150psi (10 bars) WSP
4" (100mm)
400psi (28 bars) WOG non-shock
125psi (8.6 bars) WSP
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
BAA/ARRA Compliant *
*This product complies with the Buy American Act and The
American Recovery and Reinvestment Act. For more information,
visit watts.com.