E-flite Tribute FX 3D ARF - Manual (Page 12)

1 E-flite Tribute Fx 3D ARF Assembly Manual
 6. Wrap a small piece of tape on the string where it
crosses the wing tip. Mark the tape to indicate the exact
location of the wing tip. Swing the tape over check the
position of the opposite wing tip. If these are not equal,
reposition the wing and tape and repeat until the mark on
the tape aligns with both wing tips.
 7. Place low-tack tape on the wing against the fuselage as
an indicator for the wing alignment.
 8. Check the alignment of the wing to the vertical stabilizer
to make sure the wing is perpendicular to the wing. Lightly
sand the fuselage wing saddle if there is an alignment
correction to be made.
90 Degrees
 9. Apply thick foam-safe CA to the fuselage where
it contacts the wing. Position the wing back onto
the fuselage.