E-flite Tribute FX 3D ARF - Manual (Page 24)

 E-flite Tribute Fx 3D ARF Assembly Manual
 4. If you choose not to use the wheel pants, you can secure
the wheels on the landing gear using the wheel retainers.
Use hot glue or foam compatible CA to glue the retainers
onto the landing gear. Use care not to glue the wheel to the
landing gear.
 5. Install the wheel pants and wheels. Use needle-nose
pliers to insert the wheel retainers on the ends of each
of the axle portions of the landing gear inside of the
wheel pant.
 6. Position the wheel pant so it is not touching the
work surface when the plane is resting on the tail skid
and wheels.
 7. Each wheel pant is secured using two 2mm x 6mm sheet
metal screws and a wheel pant strap. Drill the holes for
the screws into the wheel pants using a drill and 1/16 in
(1.5mm) drill bit.