E-flite Piper Pawnee 15e ARF - Manual (Page 28)

28 E-flite Piper Pawnee ARF Assembly Manual
 11. Slide the three hinges into the slots in the elevator.
 12. Slide the elevator into position on the stabilizer. The
T-pins installed in the hinges will help in keeping equal
amounts in the stabilizer and elevator.
 13. Align the elevator with the tip of the stabilizer so they
do not bind during operation. Apply a few drops onto
each hinge. Make sure to apply the CA on both the top
and bottom of the hinge.
Important: Do not use accelerator on the hinges. The CA
must be allowed to soak in and penetrate the hinge.
 14. Gently pull the elevator from the stabilizer once
the CA has fully cured. This is to verify the hinges are
glued securely.