Machine components – GBC Auto 50 MBM Crease User Manual
Page 4
Advertising
Machine Components
Air flow
controls
Backstop
Side Lays
Feed Gate
Lay Squareness
Adjustment
Top Cover
Programming
Screen
Choke Control
Wheel
Slide out
Crease Matrix
Outfeed tray
Compressor/Vacuum unit
controls
When installing the machine the supplied power cable should be plugged into the
switched power socket on the machine and then to the power supply socket. Switch the
machine on and the control screen should initialize. The compressor/vacuum unit has a
separate on/off switch located under the Choke Control Wheel. This allows the unit to be
switched off when not in use.
4
Advertising