GBC Auto 50 MBM Crease User Manual
Page 6
Advertising
Setting Side Lays cont.
Air Flow
Slots
Air Flow
Controls
Air flow to the slots is controlled using the thumbscrews running along the top edge of
each lay. By screwing them down all the way the flow of air will be stopped. This should
be done if the document does not cover the slots. Screwing them up will allow air to pass
through the slot. The thumbscrews are fitted with antivibration devices, to prevent the
settings from altering during normal operation. After placing the paper onto the machine,
the magnetic backstop should be placed behind the stack to prevent it from moving.
6
Advertising