Human Touch iJoy 300 Robotic Massage Chair - Manual (Page 4)

7 6
www.ijoy.com
1. Unfold the chair
Pull gently up on the headrest to unfold the chair to an upright
position. When completely unfolded, the backrest locks into place.
Unpack the box
Chair in folded position Backrest cushion Head pillow
Your iJoy
®
-300
requires some simple assembly
(no tools required). Just follow the instructions on this
page, and in a few short minutes you’ll be set to go!
2. Attach the backrest cushion
Attach the top of the backrest cushion to the chair using the hook-and-loop strips. From the front of the
chair, push the flap located at the bottom of the backrest cushion down behind the seat.
3. Attach the head pillow
Pull the two straps located on the back of
the headrest up and over the top of the chair.
Attach the head pillow to the straps using
using the hook and loop strips. Adjust the head
pillow height for maximum comfort.
GET
READY