IDX A-E2KPm - Manual

Thank you for purchasing the A-E2KPm. This bracket is an optional adaptor designed to fit the
AJA Flash Disk Recorder Ki Pro Mini onto a camcorder together with V-Mount batteries. Prior
to using the A-E2KPm, IDX recommends reading this Instruction Manual on how to best use this
bracket and recommends keeping this manual for your reference.
Design and specification are subject to change without notice.
201106
A-E2KPm
Ki Pro Mini adaptor
ENDURA Battery V-Mount / Video Camera
＊
Ki Pro Mini
D-TAP output : 12V DC (unregulated) battery throughput (Max. 50W)
Dimensions : 113(W) x 134(D) x 180(H) mm / 4.45(W) x 5.28(D) x 7.09(H) inches.
Weight : Approx. 700g / 1.55lbs.
Included accessories : UNC 1/4-20 screw x 4
Do not attempt to modify this unit. All work should be carried out by IDX authorized
service personnel only.
When connecting a battery or adaptor to the A-E2KPm, be sure to connect it firmly. If it is
not attached properly, it may result in loss or damage to the unit or even injury to the
user.
Stop using immediately in case of abnormal smell, leak, color, or chassis deformity
during use.
If you need any inspection or repairs, please contact your IDX dealer or appropriate
IDX office.
D-TAP
12V DC (unregulated) Battery Output
DC output for an on-board
camera light and other DC
operated accessory.
Specifications
Preparation
Set up
Please attach connector cable to
Ki Pro Mini as shown above.
Securely fit the bracket to the Ki Pro Mini
using the 4 x UNC 1/4-20 screws.
DC output for the V-Mount
equipment.