IDX EB-2 - Manual

Rev. 2004. 04.22
www.idx.tv
Specifications
DC output : 1 channel (4 pin XLR connector, No.1 minus, No. 4 plus)
Output Voltage : Voltage of ENDURA batteries(14.4V)
Discharge current : Maximum 10A
Number of batteries to be used : Maximum 4 x of E-50 / E-80 (PowerLinked)
LED display
: Output voltage 14V or higher Green LED on
: Output voltage below 14V Red LED on
: Output voltage 12V or below LED off (power off)
Dimensions : 80(W)x165(H)x98(D)mm (128(W)mm feet extended)
Weight : Approx. 700gs
Applicable batteries
E-50, E-50S, E-80, E-80S
Caution
Maximum discharge current when using 2 x E-50 or E-50S is 8A (maximum 4A per one
ENDURA E-50 or one E-50S). Loads over 8A may activate the battery protection circuit and
automatically stop the supply of power.
Maximum discharge current when using 2 x E-80 or E-80S is 12A (maximum 6A per one
ENDURA E-80 or one E-80S). Loads over 12A may activate the battery protection circuit and
automatically stop the supply of power.
In Japan/Asia
IDX COMPANY LTD.
6-28-11 Shukugawara,
Tama-ku, Kawasaki-Shi,
Kanagawa-ken 214-0021,
Japan
Sales and service
Phone +81-44-850-8801
Fax +81-44-850-8838
E-mail [email protected]
In the United States
IDX System Technology
1602 Lockness Place,
Torrance, CA 90501 USA
Sales and Service
Phone +1-310-891-2800
Fax +1-310-891-3600
E-mail [email protected]
In Europe/Middle East
IDX Technology Europe Ltd.
Unit 34 Metropolitan Centre,
3 Taunton Road, Greenford,
Middlesex UB6 8UQ, England
Sales and service
Phone +44-20-8813-1666
Fax +44-20-8813-1777
E-mail [email protected]
V03.05.01
EB-2 Power Base Station