Kessler MOTION CONTROL: CineDrive Turntable Conversion Kit - Manual

CineDrive Turntable Conversion Kit Installation Guide
®
Pan Brick Removal and Preparation for Turntable Kit Installation:
Step 1
Remove the three 1/4”-20x.75 flat head allen screws joining the pan brick and tilt bricks
using a 5/32” hex allen wrench. Retain screws for possible future use.
What’s Included
a. (1) Turntable Degree Wheel with Sticker
b. (4) Turntable Plate Mounting Screws ¼”-20 x .75” Socket Countersunk Screw
c. (1) Degree Indicator with 5/16” x 3/4” Stainless Dowel Pin
d. (1) Degree Indicator Mounting Screw ¼”-20 x .75” SHCS
e. (1) Turntable Base
f. (4) Turntable Base/Hub Mounting Screws 1/4”-20 x 1.75” SHCS
g. (1) 5/32” Allen Wrench
h. (1) 3/16” Allen Wrench
a.
b.
c. d.
e.
f.
g.
h.