Kessler MOTION CONTROL: CineDrive Turntable Conversion Kit - Manual (Page 2)

Step 2
Mount supplied Turntable Degree Wheel to pan brick hub (where original pan mounting
plate was removed in step 2 above) using four Turntable Plate Mounting Screws.
Position of Degree Wheel and zero degrees mark does not matter when installing
Degree Wheel to hub.
CineDrive Turntable Kit Installation:
Step 1
Install supplied Turntable Base to the pan brick as shown using four Turntable
Base/Hub Mounting Screws.
®
Step 2
Remove the four Turntable Plate Mounting Screws holding the pan brick mounting plate
to the pan hub. Retain screws and mounting plate for possible future use.