Kessler MOTION CONTROL: CineDrive Turntable Conversion Kit User Manual
Page 4
Advertising
Optional Mounting Hub Installation:
Step 1
Remove the top Degree Wheel from the Turntable with the supplied 5/32” allen wrench
Step 2
(If Turntable Base is installed, remove before installing Mounting Hub.)
Line up the Mounting Hub with the bottom of the Turntable brick. Use the supplied
Turntable Base/Hub Mounting Screws and 3/16” allen key to bolt the Hub to the brick.
Step 3
Re-install the top Degree Wheel.
Advertising