Kino Flo Image 80, 40 & 20 DMX - Manual (Page 4)

Place the long edge of the Louver into the lower channel containing a set of
leaf springs. Press down on the Louver and slip the upper edge of the
louver into the upper channel of the fixture. To remove reverse the
procedure.
4
Junior Pin Assembly
The Image 80 requires a
Junior Pin assembly or
any other clamping device
that uses a ½ inch bolt.
The Image 80 uses the
longer bolt. The Image 40
or 20 require the shorter
bolt.
The Baby Receiver is for use
only on the Image 40 and
Image 20.
Do Not use the Baby
Receiver on the Image 80.
This receptacle is not strong
enough to safely hold the
greater weight of the Image
80.
Baby Receiver Assembly