Kino Flo Image 80, 40 & 20 DMX - Manual (Page 9)

Setting the unit to "Fixture Mode" allows
the user to re-create the "Inside-Out"
pattern of the manual switch.
One of the best applications for the
"Fixture Mode" is when lighting Blue and
Green Screens or large Cycloramas.
For example: One row of fixtures can be
set to Fixture mode on a common
address. When the fader on the dimmer
board is brought up or down all the
Fixtures on that address will have the
same lamps turned on.
Dimmer level - Lamp response
Sliding the fader on the dimmer board from 0 ~ 100 controls the
number of lamps that are on within a fixture. Note: the lamps may
respond ± 4 channel levels, depending on the dimmer board.
Image 80 Lamp
Sequence
DMX Lamp Sequence
Lamp # Dimmer Level
Lamp 1 6
Lamp 1~2 19
Lamp 1~3 32
Lamp 1~4 45
Lamp 1~5 57
Lamp 1~6 69
Lamp 1~7 82
Lamp 1~8 95
9