Nipros ES-600 Operating Instruction - Manual (Page 22)

22
Set the INPUT select switch
(Connector)
HD/Y
HD/B-Y
HD/R-Y
CMP IN
CMP OUT
TALLY IN
MONI IF
DC 12V IN
LVM-89W
(HD component output)
(Composite video output)
Camera adaptor
DS-260/DS-460
INPUT select mode
COMP 1
CVBS 1
HDMI HDMI
(Rear)
DC 12V power supply
(HDMI output)
(6-pin cable)
(AC adaptor)
(Composite video input)
(displayed on the screen)
connect to
(HD-Y return output)
( DC 12V, TALLY signal )
1
Monitoring the video signal
Connect the input signal to the appropriate connector according to the video signal from a camcorder.
And select the input mode by the INPUT select button.
LVM-89Wの接続方法
LVM-89W connection
Connect an external DC 12V power supply with a XLR 4-pin cable.
Or connect the MONI IF connector to the MONITOR OUT connector of the Camera Adaptor with the
supplied 6-pin cable(VC-450).
2
HD component connectors
HD/Y
HD/B-Y
HD/R-Y
(BNC 3)
CMP IN connector
(BNC)
DC 12V IN connector
MONI IF connector(6-pin)
( DC 12V, TALLY signal )
HDMI connector (Rear panel)
DC 12V IN コネクタへ DC 12V 電源をキャノン4ピンケーブルで接続します。
またはMONI IFコネクタへカメラアダプタから付属の6ピンケーブル(VC-450)を接続します。
カムコーダーから入力するビデオ信号に合わせて各コネクタに接続します。 INPUT 切替スイッチを入力信号に合わせます。
CVBS 1
COMP 1
HDMI
(TALLY output)
Multi−core Studio System NIPROS ES−300 & ES−600
(Connector) (Input mode)