Names and functions of parts, Main panel, Power switch and indicator – Nipros ES-600 Operating Instruction User Manual

Page 4: Tally indicator, Mic on/off switch, Tripod adaptor plate, Tripod screw and pin

Advertising
background image

Names and Functions of Parts

4

Camera Adapter ES−300

メインパネル

Main panel

コネクタパネルの INTERCOM HEADSETコネクタ(キャノン4P)に接続されたヘッドセットDL400の MIC,

H.P(ヘッドホン)およびサイドトーンの音量レベルを調整します。

INTERCOM HEADSET Microphone, Headphone and Side tone volumes

Adjusts the audio levels of the microphone, the headphone and the side tone of the Intercom headset

DL-400 connected to the INTERCOM HEADSET connector (XLR 4-pin) on the connector panel.

POWER switch and indicator

電源をON/OFFするスイッチです。電源スイッチがONになっている時に点灯します。

Turns the power on and off. The indicator lights up when the power switch is on.

ベースステーションDS-560からのタリー信号を受けて点灯します。

TALLY indicator

Lights up when receiving the tally signal from the Base Station DS-600.

MIC ON/OFF switch

INTERCOM

SIDE

TONE

CAMERA ADAPTOR

ES-300

Turns on/off the intercom headset microphone.

インターカムヘッドセットのマイクを ON/OFFします。

Tripod Adaptor plate

Fits with the Sony tripod base, VCT-14, VCT-U14.

三脚ベースSONY製VCT-14,VCT-U14に装着できます。

Tripod Screw and Pin

Fix to the bottom of the camcorder.

カムコーダーの底面へ取り付けます。

Advertising
This manual is related to the following products: