Nipros FS-40X - Manual (Page 16)

POWER
INT OFF EXT
METER SELECT
VU
PK
R / PFL L / BATT
L
R
FIELD MIXER
LEVEL
L
L+R
VU
PK
L
R R /
16
4 ch Field Mixer FS-40X
Use
Output Level Adjustment
２． Connect a headphone to the HEADPHONE MONITOR jack.
３．Turn the 1 kHz switch on.
turn fully down（ ）
when stereo＝L/R
when mono＝L+R, L or R
a little upper from
POWER
INT OFF EXT
METER SELECT
VU
PK
R / PFL L / BATT
L
R
FIELD MIXER
LEVEL
LMT
PFL
L
L+R
VU
PK
MS
0
L
R R /
LMT
PFL
LMT
PFL
LMT
PFL
0 0 0
MS
１. Turn all the CH mixing level volume controls fully down, to the position.
And set the HEADPHONE MONITOR select switch on the right side of the main panel(front) to the
appropriate position, L/R or other and turn the HEADPHONE MONITOR LEVEL volume control to
a little upper position of the position.
20 12 30 40 60
0 VU/PEAK
FS-40X for professional
■Adjust the output level
4．Set the METER SELECT switches to the VU or PK.
When the selected meter is a type same as the meter that is attached to the recorder connected,
the level is adjusted more precisely.
METER SELECT switch
select VU or PK
HEADPHONE MONITOR
select switch LEVEL volume control
turn on
POWER
INT OFF EXT
METER
SELECT
VU
PK
R / PFL L / BATT
L
R
FIELD MIXER
LEVEL
L
L+R
VU
PK
L
R R /
METER SELECT
CH 1-4 mixing level volume controls
up