Reloop MIXAGE IE MK2 - Manual (Page 27)

ENGLISH
27
3.2.2. CONFIGuratION
If Traktor LE is used for the first time the „Setup Wizard“ should start. If this is not the case please
click on „Help“ and select the menu item „Start Setup Wizard“. In the setup wizard select the
following items:
1. Answer the first question „Are you using a USB/FireWire Controller?“ with „Yes“. Then click on
„Next“.
2. In the field „Choose your manufacturer“ select the item „Reloop“. The following menu item
„Choose your model“ has to be answered with „Mixage“. Again confirm this selection with „Yes“.
3. The following question regarding connected hardware by manufacturer „Native Instruments“
has to be answered with „No“.
Your Reloop Mixage should now be configured accordingly for Traktor LE.
3.3. audIO SEtup & MappING IMpOrt
In order to be able to use Traktor with your setup combined with Mixage, please observe the fol-
lowing items in detail.
3.3.1. audIO SEtup
1. In Traktor open the setup dialogue by clicking the small cog wheel in the upper right corner.
2. Open the catagory „Audio Setup“ and in the filed „Audio Device“ select the item „Reloop ASIO
(ASIO)“.
3. Open the category „Output Routing“ and in the field „Mixing Mode“ select the button „Inter-
nal“. For channel assignment please see the following example.