Coleman PM402511 User Manual
Page 5
The stationary standby electric generator is
manufactured for our customers to supply reliable
backup power. The generator is a compact unit,
designed to supply the power for your critical needs
when utility power fails.
The standby generator will run on Liquid Propane
Gas or Natural Gas allowing flexibility for getting the
power you need. Fuel lines should be installed by a
licensed plumber or other qualified professionals or
licensed gas technician.
•About the Owners Manual
Understanding the operation of the generator is
important when using or maintaining your system. If
there are any questions about the information supplied in
this Owner’s Manuals, call our customer service helpline
number shown on the manual cover.
•About Operation or Maintenance
All required safety checks that need to be performed
are the responsibility of the operators. Listed within the
Owners Manual are safety precautions that need to be
followed to prevent personal injuries to persons around
the unit and to prevent property damage.
.
Be sure to inspect the generator carefully for freight
loss or damage. If loss or damage is noted at the time of
delivery, require that the person making the delivery
make note of the loss or damage on the freight bill, or
affix his signature under the consignor’s memo of the
loss or damage. Contact the carrier for claim
procedures.
When loss or damage is noted after delivery,
segregate the damaged material, and contact the carrier
for claim procedures. Be sure to retain the packaging
material for carrier inspection.
“Concealed Damage” is understood to mean damage
to the contents of a package which is not evident at the
time of delivery by the carrier, but which is discovered
later. The carrier or carriers are responsible for
merchandise lost or damaged in transit. The title to
goods rests with the consignee when generators are
shipped F.O.B. factory, and only the consignee can
legally file a claim.
After inspecting the generator, engine and enclosure
for physical damage, finish reading the Operating and
Maintenance Instructions. These manuals contain
important safety information.
I
I
N
N
T
T
R
R
O
O
D
D
U
U
C
C
T
T
I
I
O
O
N
N
U
U
N
N
P
P
A
A
C
C
K
K
I
I
N
N
G
G
I
I
N
N
S
S
T
T
R
R
U
U
C
C
T
T
I
I
O
O
N
N
S
S
RISK OF INJURY AND BEING CRUSHED
•
HEAVY EQUIPMENT. Unbalanced weight.
Improper lifting can cause severe injury or
death and equipment damage. The generator
frame has been designed with rectangular slots
and frame tubes to be used with a forklift for
removing the unit from the pallet and
positioning the unit on the cement pad.
W
WA
AR
RN
NIIN
NG
G
RISK OF ELECTROCUTION AND/OR INJURY
•
The installation of this equipment must be done
by licensed electricians contractors gas
technicians and plumbers. Installation must be
completed in conformance with NEC and local
electrical and building codes. Some areas may
require building permits and/or detailed sight
inspections prior to approving the unit for
operation.
W
WA
AR
RN
NIIN
NG
G
5