SONIQ M200 - Manual (Page 9)

........................................................................................................................
16 15
Technical specification General information
Care and Maintenance
Your radio is of superior design and manufacture and should be treated
with care. The suggestions below will help you to enjoy this product and
the benefits it brings for many years.
- Keep the product and all its parts out of reach of children.
- Keep it dry. Avoid exposure to precipitation, humidity and liquids which
could all affect the product circuity.
- Do not leave it in high temperatures as electronic devices and plastic
parts may warp in heat.
- Do not leave it in low temperatures as moisture can form inside the
product, which may damage the circuit board.
- Do not store in dusty or dirty areas.
- Do not use harsh chemicals, cleaning solvents or detergents to clean
the product. Wipe with a damp (not wet) soft cloth to clean.
- Do not attempt to open the product. Unauthorised handling of the
device may damage it and will void your warranty.
- Only use the power supply that came with the product. Using an
unauthorised power supply will invalidate your guarantee and may
irrecoverably damage the radio.
Technical specification
Power adaptor: Output 6V. Input 100-240V 50/60Hz
Batteries: 4 x LR14 (Size C) batteries or equivalent
(not included).
Frequency range:
DAB Band lll, 174 MHz to 240 MHz
FM 87.5 MHz to 108 MHz
Headphone: Stereo socket 3.5mm diameter
Software version
If you call the helpdesk, they may ask you for the software version of
your radio. To check the software version:
1. Press and hold ‘Info’ until ‘Station Sort’ is displayed.
2. Repeatedly press the ‘Info’ button until ‘Soniq’ together with some
numbers and letters is displayed. This is the software version and you
may need to make a note of it here: