SONIQ MC9 - Manual (Page 11)

10
USING THE MODE/REMAIN BUTTON
Press the MODE/REMAIN button to change the display as shown below.
1. In radio mode: Frequency display >> Time display >> Timer ON time display.
2. In CD mode:
(During playback) Elapsed play time display >> Remaining time display>> Clock
display >> Timer ON time. (While stopped) Total time >> Clock display >> Timer ON time.
PRESET EQ SETTING
Press the PRESET EQ button on the system (or the remote control) and the LCD will show the
selected equalization setting (CLASSIC or ROCK or POP).
MEMORY BACKUP
Fit three 1.5 V AA (UM-3 / LR6) or equivalent batteries in the system's battery compartment. These
batteries are used to back up the microprocessor's settings memory.
RESETTING
If the display show unusual indications or if the buttons do not work properly, then press the Reset button
on the back of the system.
BEAT CUT/FM MODE (MONO/STEREO) SWITCH
If a beat can be heard during recording, move the BEAT CUT/FM MONO/STEREO switch on the back of
the system to the BEAT CUT position (in AM mode only).
NORMAL
CLASSIC ROCK POP
NOTES ON COMPACT DISCS
1. Always use compact discs that bear the following logo.
2. Notes on handling discs
When removing the disc from its storage case and loading it into the player:
* Never touch the reflective surface (recorded side).
* Never affix any paper to the discs recorded surface or write anything on it.
* Never bend the disc.
3. Storage
* Always store the disc in its case.
* Never expose compact discs to direct sunlight or high temperatures, to excessive dampness or dust.
4. Cleaning a disc
* If the disc requires cleaning, remove any dust and fingerprints using a soft cloth.
* Always clean the disc by wiping from the center towards the outside edge.