SONIQ PB100 - Manual (Page 13)

13
Turning on the Unit
1. Slide the CHARGE / OFF / ON switch on the player to the ON position.
2. The start-up picture will appear on the screen.
3. After use, slide the CHARGE / OFF / ON switch on the player to OFF.
Note:
• If the CHARGE / OFF / ON switch is in ON position, but the product does not appear to be on,
it's actually in STANDBY mode - you can turn it on by moving the switch to the OFF (middle)
position, then back to ON position. You can also turn the product from STANDBY to ON
using the remote control's STANDBY/ON button.
• When the CHARGE / OFF / ON switch is in ON position you can use the remote control to
put the product in STANDBY mode. The red light on the front of the product will illuminate
when the product is in STANDBY mode.
• Please ensure the player is powered by the AC power adapter if you intend to use STANDBY
mode.
DTS2.0+Digital Out
DTS2.0+Digital Out denotes the dual ability to pass the DTS encoded digital bitstream to an external
DTS decoder for playback as well as down-mix the digital surround soundtrack for playback in a
2-channel environment through analog outputs.
Manufactured under license under U.S. Patent #'s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued
& pending. DTS and the Symbol are registered trademarks, & DTS 2.0+Digital
Out and the DTS logos are trademarks of DTS, Inc. Product includes software. ©DTS, Inc. All
Rights Reserved.
Dolby TrueHD
Dolby TrueHD is a very high quality audio format that reproduces the studio master audio.
This unit allow audio to be decoded to a maximum of 5.1 ch of PCM audio and output from the HDMI
terminal. Also, audio can be output with "Bitstream" to an AV amplifier that supports it.
Manufactured under license from Dolby Laboratories.
'Dolby' and the double-D symbol are trademarks of Dolby Laboratories.
SOUND SYSTEM
UNIT OPERATION