SONIQ PB100 - Manual (Page 23)

23
Strap A
Strap B
A
1.
3.
5.
A
B
B
A
2.
4.
CARRYING BAG INSTALLATION
SAFETY wARNING!
On no account should this unit be used
by the driver of a moving motor vehicle,
or left unsecured in the vehicle whilst
driving.
If this unit is being used by a passenger
in your vehicle, be sure that it is secured
or held safely, and does not obstruct
any safety device (i.e. airbag, seat belt,
etc.) that is fitted.
CAUTION:
1. High temperature damages discs.
2. Do not store in closed cars.
3. Protect from direct sunlight.
4. Using other car power adaptor could damage
the unit.
1. Insert the unit into the bag as shown.
2. Insert the straps to the carrying bag as shown.
3. Loop the Strap A around the car's headrest
support (i.e. just below the headrest) as shown
below.
4. Mount the Strap B around the car seat itself, as
shown below.
5. Adjust the straps tightly so that the unit is
secured. Then connect the 12V car power
adaptor as shown.