SONIQ QV193LTI - Manual (Page 13)

13 - 13 -
CONNECTING THE POWER CORD
• Connect the AC power cord into a wall outlet.
• Press the / I button on the unit or remote control to turn on the unit.
Note:
• Be sure the AC power cord is disconnected and the TV is switched off before making
connections.
• Make sure that all the components are connected
correctly.
• When you are not going to use the unit for a long
period of time, disconnect the power cord.
• The apparatus should not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, should be placed on
apparatus.
• The mains plug is used as the disconnecting
device. It should remain readily accessible
and should not be obstructed during use. To
be completely disconnected from the supply
mains, the mains plug of the apparatus should
be disconnected from the mains socket outlet
completely.
Wall
Antenna
Socket
Outdoor Antenna
(VHF, UHF)
RF Coaxial
Wire
(75 ohm)
CONNECTING ANTENNA
Note:
For receiving over-the-air TV broadcasts, we
recommend that you use an external fixed
antenna. Should you require the use of a
temporary antenna, please ensure that you
purchase an antenna with sufficient ability to
receive in weak signal areas. Only when you are
in close proximity to a transmitter will a temporary
antenna reproduce a signal as strongly as a
fixed antenna.
Connection and setup
To AC
outlet