Cd / dvd operation – SONIQ QV193LTI User Manual
Page 27
27
- 27 -
PLAYING A DISC
1. Press the / I button to turn the unit on.
2. Press the
FUNCTION button repeatedly to select DVD mode or directly to press DVD button
on the remote.
See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 3.
3. Press the
PUSH OPEN button to open the disc door.
4. Hold the disc by its edge and gently push it onto the spindle, with the label side facing the
front, until you hear a “click”.
5. Push disc door gently to close it.
It takes a short while for your unit to load the disc. After loading, the unit will automatically
either bring you to the main menu of DVD, or start playing the DVD. If the unit does not
automatically start playing the DVD, press the
PLAY button.
PLAYING A PICTURE FILE DISC
This unit can play picture files recorded on CD-R and CD-RW discs.
1. Press the
PUSH OPEN button to open the disc door.
2. Hold the disc by its edge and gently push it onto the spindle, with the label side facing the
front, until you hear a “click”.
3. Push the door gently to close it. The picture files on the disc will be displayed one by one
automatically.
4. Press the
STOP button to go to the folder list.
5. Press the or button to highlight a file to play. Press the
PLAY button to start
playback.
Note:
• You can press the
PAUSE button to interrupt playback, and press the PLAY button to
resume playback.
• You also can use the
GOTO function or use the numbered buttons to enter the image number
to quickly select any image.
• Press the
ANGLE button on the remote control to rotate the picture orientation by 90°.
This owner’s manual explains the basic instructions of this unit. Some DVDs are produced
with limited operation during playback. For example, many DVDs do not allow users to skip
government warnings, or in some cases previews or other features. This is not a defect in
the unit. Refer to the instruction notes of discs.
“ ” may appear on the screen during operation. A “ ” means that the desired operation
is not permitted by the unit or disc.
PAUSING PLAYBACK (STILL MODE)
Press the
PAUSE button. To resume normal playback, press the PLAY button. Each time
you press the
PAUSE button, the picture advances one frame on DVD.
STOPPING PLAYBACK
Press the
STOP button at the location where you want to interrupt playback. To resume
playback at the position where the disc was stopped, press the
PLAY button.
If you press the
STOP button twice, the unit’s memory will be cleared and pressing the
PLAY button will reset the disc to the beginning.
SKIPPING TO A DIFFERENT TRACK
• Press the
PREV button to go back to previous chapters/tracks.
• Press the
NEXT button to advance chapters/tracks.
• For an audio CD, use the number buttons on the remote control to go directly to the desired
track number.
CD / DVD Operation