TeachLogic VoiceLink Plus - Manual (Page 13)

7
installation of receiver/amplifier
Location of the receiver/amplifier is primarily determined by user accessibility, availability of
an electrical outlet, location of the auxiliary input source, and routing of the sensor and speaker
cables. The receiver/amplifier can be placed on desk top, mounted on the wall, mounted on top
or under a shelf using the mounting flanges and hardware provided.
mounting receiver/amplifier
Desk Top Location
•
Install soft vinyl pads on bottom of receiver
•
Locate for convenient use
Shelf or Wall Mount
•
Attach the mounting flanges using round holes
and small plastic rivets.
Caution: Assure rivets are aligned and seated
before pushing rivet into hole
•
With flanges attached, hold receiver in place.
•
Mark mounting holes
•
Drill a 3 /
32
" pilot hole for screwing directly into a
solid surface using the mounting screws.
•
Drill a 5 /
32
" hole and insert a plastic anchor in
drywall or concrete wall.