Tweco Auto Darkening Welding Helmet - Manual (Page 17)

AUTO-DARKENING WELDING HELMET INTRODUCTION
Manual 0-5045 2-2
2.04 Description: Auto-Darkening Welding Helmet
The Thermal Arc Auto-Darkening Welding Helmet is an ultra modern product manufactured specifically for welding
comfort, versatility, performance and fume deflection. To ensure your complete satisfaction with your new Auto-
Darkening Welding Helmet and to realise a safer work environment, we ask that you read the following Operating
Manual thoroughly before use.
2.05 User Responsibility
This product will perform as per the information contained herein when installed, operated, maintained and repaired
in accordance with the instructions provided. This equipment must be checked periodically. Defective equipment
should not be used. Parts that are broken, missing, plainly worn, distorted or contaminated, should be replaced
immediately. Should such repairs or replacements become necessary, it is recommended that such repairs be carried
out by appropriately qualified persons approved by Thermal Arc. Advice in this regard can be obtained by contacting
an accredited Thermal Arc Distributor.
This product or any of its parts should not be altered from standard specification without prior written approval of
Thermal Arc. The user of this product shall have the sole responsibility for any malfunction which results from improper
use or unauthorised modification from standard specification, faulty maintenance, damage or improper repair by
anyone other than appropriately qualified persons approved by Thermal Arc.