Section 2: introduction, 01 how to use this manual, 02 equipment identification – Tweco 170Pi Transtig User Manual

Page 13: 03 receipt of equipment, Section 2, Introduction -1, How to use this manual -1, Equipment identification -1, Receipt of equipment -1, Transtig 170pi

Advertising
background image

TRANSTIG 170Pi

Manual 0-5241

2-1

INTRODUCTION

SECTION 2:

INTRODUCTION

2.02 Equipment Identification

The unit’s identification number (specification or

part number), model, and serial number usually ap-

pear on a nameplate attached to the control panel. In

some cases, the nameplate may be attached to the

rear panel. Equipment which does not have a control

panel such as gun and cable assemblies is identified

only by the specification or part number printed on

the shipping container. Record these numbers on the

bottom of page i for future reference.

2.03 Receipt Of Equipment

When you receive the equipment, check it against the

invoice to make sure it is complete and inspect the

equipment for possible damage due to shipping. If

there is any damage, notify the carrier immediately to

file a claim. Furnish complete information concerning

damage claims or shipping errors to the location in

your area listed in the inside back cover of this manual.
Include all equipment identification numbers as

described above along with a full description of the

parts in error.
Move the equipment to the installation site before

un-crating the unit. Use care to avoid damaging the

equipment when using bars, hammers, etc., to un-

crate the unit.

2.01 How To Use This Manual

To ensure safe operation, read the entire manual,

including the chapter on safety instructions and

warnings.
Throughout this manual, the words WARNING,

CAUTION, and NOTE may appear. Pay particular at-

tention to the information provided under these head-

ings. These special annotations are easily recognized

as follows:

!

WARNING

A WARNING gives information regarding

possible personal injury.

CAUTION

A CAUTION refers to possible equipment

damage.

NOTE

A NOTE offers helpful information con-

cerning certain operating procedures.

Additional copies of this manual may be purchased by

contacting Cigweld at the address and phone number

for your location listed in the inside back cover of this

manual. Include the Owner’s Manual number and

equipment identification numbers.

Advertising