Tweco ProPlus Digital Auto-Darkening Welding Helmet - Manual (Page 19)

ProPlus Auto-Darkening Welding Helmets
Manual 0-5276 19
• VARIABLE SHADE CONTROL
After turning on the lens, press “FUNC” button to choose “SHADE”, and adjust lens shade number (See Fig. 9-3/9-4/9-5: A&B). Use
the shade control UP and DOWN buttons to select the lens shade in the dark state (See Fig. 9-3/9-4: C&D). The shade range for each
mode are as below:
Weld Mode − Shade No. 8-13 (See Fig. 9-3)
7a
Art # A-11799
Figure 9-3 Variable Shade Control- Weld Mode
Cutting Mode −Shade No. 5-8 (See Fig. 9-4)
7b Art # A-11800
Figure 9-4 Variable Shade Control- Cutting Mode
Grind Mode −Shade No. 4 only (See Fig. 9-5)
Art # A-11801
Figure 9-5 Variable Shade Control- Grind Mode
Select the proper shade number for your welding/cutting process, by referring to “Table 4-1 Recommended Protective Filters for Electric
Welding”.