Tweco 170 HF Weldskill - Manual (Page 28)

WELDSKILL 170 HF INVERTER
4-6 April 23, 2008
4.12 Welding Position
The electrodes dealt with in this publication can be used in most positions, i.e. they are suitable for welding in
flat, horizontal, vertical and overhead positions. Numerous applications call for welds to be made in positions
intermediate between these. Some of the common types of welds are shown in Figures 4-2 through 4-9.
Art # A-07687
Figure 4-2: Flat position, down hand butt weld
Art # A-07688
Figure 4-3: Flat position, gravity fillet weld
Art # A-07689
Figure 4-4: Horizontal position, butt weld
Art # A-07690
Figure 4-5: Horizontal - Vertical (HV) position
Art A-07691
Figure 4-6: Vertical position, butt weld
Art # A-07692
Figure 4-7: Vertical position, fillet weld
Art# A-07693
Figure 4-8: Overhead position, butt weld
Art # A-07694
Figure 4-9: Overhead position fillet, weld