Cabletron Systems 6A000/ZX-250 - Manual (Page 214)

2-190 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
Descriptions
Examples
switch_prompt # modify switchtrafficcongestion
Queue1EFCIThreshold(16383) : 2000
Queue2EFCIThreshold(16383) : 2000
Queue3EFCIThreshold(16383) : 2000
Queue4EFCIThreshold(16383) : 2000
LowEPDWatermark(7552) : 4000
HighEPDWatermark(7552) : 8000
RMCellMarkingEnable(0) : 1
EFCIMarkingEnable(0) : 1
switch_prompt #
switch_prompt # show switchtrafficcongestion
Switch Traffic Congestion Parameters
===========================================================================
Queue 1 EFCI Threshold (cells) : 16383
Queue 2 EFCI Threshold (cells) : 16383
Queue 3 EFCI Threshold (cells) : 16383
Queue 4 EFCI Threshold (cells) : 16383
Low EPD Threshold (cells) : 7551
High EPD Threshold (cells) : 7551
Switch Discard Threshold (cells) : 15103
RM Cell Marking Enable : 0
EFCI Enable : 0
switch_prompt #
Operator Parameters/Permissions Descriptions
modify
switchtrafficcongestion
[Queue#EFCIThreshold]
<queue#efcithreshold>
[LowEPDWatermark]
<lowepdwatermark>
[HighEPDWatermark]
<highepdwatermark>
[RMCellMarkingEnable]
<rmcellmarkingenable>
[EFCIMarkingEnable]
<efcimarkingenable>
Administrator
Modifies the congestion control parameters for
the switch. For example, the EFCI thresholds
indicate when a threshold is exceeded; the
switch discard threshold discards cells when the
memory buffer is full. 1 enables the parameters
[RMCellMarkingEnable] and
[EFCIMarkingEnable]. 0 disables them.
show
switchtrafficcongestion
All Displays the current traffic congestion settings
for the switch.