Cabletron Systems 6A000/ZX-250 - Manual (Page 48)

2-24 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
Client
Use Client to determine all or local LANE (LAN emulation) and IP/ATM (IP over ATM) clients on the switch.
Operators
delete, restart, show
Parameters
In the Output Parameter table below, (</d>) appears next to parameters that are available only through the show
client /d (detailed) command.
SERVER SVC
X X
Input Parameter Description Value/Field Size Default
[ClientNumber] Number of the local client. 0-127 ALL
Output Parameter Description
[Type] Type of client.
[IP Address] IP address of client.
[Server Type] Specifies what server type the client is on.
[Server Conn] Type of connection the client has with the server.
[Status] Current status of the client.
[Client State] (</d>) Status of where the client is in the process of making a connection.
[Client Address] (</d> ) ATM address of the client.
[LAN Name] (</d>) ELAN name for this client.
[LECS Addr Source]
(</d>)
ILMI, well-known address, or LECS address.